Pipe Protection Caps & Plugs

SAE Butt Weld covers offer effective protection for SAE J518-61 flanges. Specifically designed to shield split-flange coupling surfaces from damage, contamination and moisture during storage, handling and transportation.

This series is manufactured from Post Consumer Recycled material, which is designed to support Essentra’s ESG ambitions and those of our customers. Material: LDPE - PCR Colour: Green Series Code: SRCALSAEPCR

Heavy Duty Pipe Caps protect the end of pipes from dust, debris and contaminants. Features a reinforced design foundation. Can resist temperatures ranging from 66C up to -40C.

• Used to protect the end of a pipe from dust, dirt, and other impurities.

• Used in plumbing, heating, ventilation and industrial applications.

• Resistance to temperatures of 66C to -40C.

Material: LDPE, PE Colour: Yellow, Black Series Code: SR1389

Standard Tapered Caps and Plugs are versatile components designed for use as a plug or a cap. The tapered profile allows the part to plug multiple inner diameters or to cap multiple outer diameters.

These dual function plugs or caps are typically used to protect against damage, dirt, moisture, and other corrision during storage and shipping.

With a straight forward push fit design, these dual function components are easy to insall and remove. The extensive range offers a varied selection of sizes that range from 2.9 mm up to 345.0 mm.

• Plug design suitable for multiple inside and outside diameters.

• Protects threaded and non-threaded pipes, ports, and access points against damage, dirt, moisture, debris, and corrosion.

• Suitable for use in hydraulic systems, automotive components or medical industries.

Material: LDPE Colour: Red, Blue, Black, Clear, Yellow Series Code: SR1000, SR1111, SRF0020

SAE Butt Weld Covers are primarily used in hydraulic and pneumatic applications. They are a protective cap for use in 3000 and 6000 SAE PSI applications. Provides maximum protection for butt-weld ends on valves, pumps, and heat exchangers. These will not crack or chip and eliminates the need for plywood, masonite and fasteners.

Saves labour on assembly costs as they easily push-fit into place by hand. The special reverse angle design matches the butt-weld angle and completely covers or protects the end during shipping and storage.

Made from Low-Density Polyethylene (PE-LD) and two colour options are available. The Natural, translucent option is designed to protect split-flange coupling surfaces and allows for the O-ring to remain visible, while providing secure protection by an internal locking bead. The Red option is ideal for SAE flange nipple. Features a temperature range from minimum -30 degrees C up to a maximum +50 degrees C.

• Primarily for use in 3000 and 6000 SAE PSI hydraulic and pneumatic applications.

• Natural option protects split-flange coupling surfaces.

• Features a temperature range from minimum -30 degrees C up to a maximum +50 degrees C.

Material: LDPE Colour: Red, Natural Series Code: SR1029, SRCALSAE, SRF0004

Heavy-duty Tapered Caps and Plugs protect both threaded and non-threaded pipelines and ports. Features a thicker wall and a seal ring, resulting in more protection and damage resistance than the ordinary version. Used for applications in machinery, automotive and industrial.

• Protect threaded and non-threaded pipes, ports, and access points from damage, dust and debris during storage and shipping.

• They have a heavy duty wall and a tapered sealing ring for maximum protection.

• Used for applications in machinery, automotive, and industrial.

Material: LDPE Colour: White, Red Series Code: SR1003

Standard Size Pipe Caps are a low cost protectve cap with a high quality finish.

Moulded caps that are designed to grip over the outside diameter of threaded and non-threaded pipe ends, preventing the ingress of foreign materials during storage and shipping.

The cap design features internal ribs that ensure a tight fit. In addition, the range includes caps that have a small vent hole to eliminate air pressure build up, and meets ANSI and DIN specifications.

• Designed to prevent ingress of foreign material during storage or shipping.

• Includes internal ribs to ensure a tighter fit.

• Features a small vent hole to eliminate air pressure build up.

Material: LDPE, PVC Colour: Green, Blue, Orange, Yellow, Red, Black, Natural, Grey Series Code: SR1358, SRTXTPE, SR1387, SR1340

Flexible Pipe Caps protect threaded pipe ends. Flexible design that is simple to install. Puncture, dust, moisture resistant. Typically used in automobiles, HVAC systems, and on construction equipment.

• It protects threaded pipe ends.

• Ideal to use for pipe and tubing configurations.

• Have a outstanding toughnes and are puncture resistant.

Material: PE Colour: Yellow, White Series Code: SR1388

NPT Thread Plugs are used to seal and protect the ends of BSP and NPT threaded pipes and fittings. The robust design ensures they can withstand high pressure, temperature and damage during storage and shipment. The tapered form allows for a tight, leak-free fit across various inner diameters.

• Used to seal and protect the ends of BSP/NPT threaded pipes and fittings.

• Their robust design allows them to withstand high pressure, temperature, corrosion, dirt, and damage during storage and shipment.

• Used in plumbing pipes, HVAC, automotive, and industrial applications.

Material: LDPE Colour: Blue Series Code: SR1114

Ribbed Pipe End Plugs are designed to seal the ends of pipes and tubes securely. The straight wall on the outside diameter of the plug offers a solid friction fit with the inside diameter of the mating pipe, giving good protection against impurities entering the pipe.

They are offered in two designs, each with flexible ribs in varying sizes to accommodate a range of NPT and drill pipe schedules. Easy to install and remove due to their close fit.

The are ideal for mechanical and engineering applications in a wide range of industries.

• Two designs, each with flexible ribs in varying sizes to accommodate drill pipe schedules.

• Designed to seal the ends of pipes and tubes securely.

• Ideal for mechanical and engineering use.

Material: LDPE Colour: Blue, Red, Black Series Code: SR1069, SRILUPE, SR1171, SRILUH, SRPAR

Driveshaft Protection Caps protect the ends of exposed driveshafts from oil and chemicals, during transportation and storage. They are resistant to ripping and splitting.

• Driveshaft Protection Caps are used for the protection and masking of driveshaft, and the surrounding bearings, from oil and an array of chemicals.

• Fits DIN 748, IEC 600-72 and ISO R775

Material: LDPE, PVC Colour: Yellow Series Code: SR1079