ID Xpansion Clamps - Machinable

In production

These ID Xpansion Clamps are designed for holding parts on an inside diameter, for high density machining on vertical or horizontal mills. Diameter can range from 4,1mm to a maximum of 250mm.This product can also be used as an expanding mandrel on a lathe.

Its low profile suits it for secondary operations on lathe workpieces. It can accommodate more pieces per workpiece hub or fixture plate and is simple to manufacture to size on a lathe or milling machine.

A hex key or hydraulic pull cylinders are used to install and tighten it. It has a mild steel body and is used for machinability, medical devices, electronic manufacturing, and automotive applications.

Designed for high density machining on vertical or horizontal mills.
It has a low profile ideal for secondary operations on lathe workpieces.
Used for machinability, medical devices, electronic manufacturing, and automotive applications.

Material: Mild Steel

Print page

Request a quote

For large volumes and customised products, add to your cart and click request a quote, orcontact usand we will respond within 1 working days.

12 results

Sort by

None

Product SKUs information
Availability	h3	d5	h2	h1	d4	d1 +0.000\|-0.050	d3 min
Request the lead time here	6.1	4.1	7.6	10.7	M2	20.0	4.1

Request the lead time here	32.3	19.3	37.6	45.5	M16	152.4	29.3

Request the lead time here	20.6	20.3	25.4	31.8	M12	56.0	23.0

Request the lead time here	32.3	19.3	37.6	45.5	M16	132.9	29.3

Request the lead time here	32.3	19.3	37.6	45.5	M16	107.5	29.3

Request the lead time here	27.0	21.4	31.8	39.6	M16	69.5	29.3

Request the lead time here	15.0	11.2	19.0	24.9	M6	31.5	12.2

Request the lead time here	27.0	21.4	31.8	39.6	M16	75.5	29.3

Request the lead time here	17.5	16.3	22.2	28.6	M10	50.0	18.0

Request the lead time here	32.3	19.3	37.6	45.5	M16	132.9	29.3

Request the lead time here	15.0	13.2	19.0	24.9	M8	37.5	13.5

Request the lead time here	15.0	7.2	16.0	21.8	M4	29.7	7.1